On Air conditioners without remote

First things first

? Can you reach the air conditioner? If you are in a wheel chair you may not be able to.

? If you can reach the air conditioner, will you be able to operate the controls?

? Do you have the instruction manual for the air conditioner? If so, it is the very best source of information regarding operating your air conditioner if you cannot use the remote control.

? If you do not have the instruction manual, it is almost certain that you can find it on the Internet. Just google the name of the manufacturer followed by the model of the air condition

Most models of Split Acs will have either a power or some sort of switch behind the front grille on the bottom right.

In some air conditioners you will find a button on the side of the rotating blades of your AC. If you press it, your AC will turn on.

You can download many apps from google play store if you own a infrared port ( IR) on your mobile phone and you can control AC with it. I had posted a video in my YouTube channel about it. Click Here if you need to see it. 

Automatically Off and On

You can use a micro controller based small unit to be attached to your Air Conditioner which can detect human presence and also write the code for your controller such that it can sense the room temperature and if it rises above a particular level and provide a human interface such you can set till what temperature it should cool the room.
D6T thermal sensor- for human presence
RTD-temperature detection. 

Home automation have all this feature. You need not to use any remote or switch to control various appliances. Its convenient as well as safe. It consists of PLC with sensors ,RTD,alarms etc.

Moreover Cheap brands and models normally use only remote to control them, as it is cheaper to produce them without front panel and with only an IR sensor. In this case, if your remote is damaged or missing, get an universal remote from any electronic shop or buy from online. If it was designed for exclusive remote controlling, its front panel should only have a power button. If it was designed for remote-less control, the panel should have buttons for temperature control.

For Voltas AC

What you need to do is to open the ac filter cover on front. Nudge the cover from both sides of the ac to open it. There will be 2 holes beside the circuit board. Take a small pen or screwdriver and insert into bottom hole and slightly push it. When doing those make sure your ac switch is on. The ac will now get automatically started. Same process to switch off the ac. 

Thanks 

By G4tecvlog Team