ECO Button in AC Remote

ECO button is used to enter the energy efficient mode.

Under cooling mode  press this button, the remote controller will adjust the temperature automatically to 24 degree celsius, Fan speed of auto to save energy ( but only if the set temperature is less than 24 degree celsius). If the set temperature is between 24 degree Celsius and 30 degree celsius Press  is the ECO  button, the fan speed will change to Auto, the set temperature will remain unchanged.

Important Note :

Pressing the TURBO and SLEEP button,

Modifying the mode or adjusting the set temperature to less than 24 degree celsius will stop ECO operation

Under ECO operation, the set temperature should be 24 degree Celsius or more. It may result in insufficient cooling - if you feel uncomfortable, just press the ECO button against to stop it.

Please comment your doubts down here 

For ECO button video Click Here

Thanks

How to clean your AC air filters?

Let's start..

A clogged conditioner can reduce the cooling efficiency of your unit, and can also be bad for your health. So make sure to clean the filter once every two weeks atleast.

 The above is an image of clogged air filter.

I will give you a step by step guide for cleaning your AC air filter

1. Lift the front panel of the indoor unit. Confirm It's locked or not.

2. First press the tab on the end of filter to loosen the buckle, lift it up , then pull it towards yourself.

3. Now pull the filter out.

4. If your filter has a small air  freshening filter, unclip it from the larger filter. Clean this air freshening filter with the handheld vacuum.

But I cleaned it under running water and kept it in the sunshade for 1 hour for drying.

5. Clean the large air filter with warm, soapy water. Be sure to use a mild detergent.

6. Rinse the filter with fresh water, then shake off excess water. ( If you are not sure how to do it then kept in shade )

7. Dry it in a cool, dry place, and refrain from exposing it to direct sunlight.

8. When dry reclip the air freshener filter to larger filter, then slide it back into the indoor unit.

9. Close the front panel of the indoor unit.

Caution : 

Before changing the filter or cleaning, turn off the unit and disconnect its power supply.

When when removing filter do not touch metal parts in the unit. It can cause injury to your body.

Do not use water to clean the inside of the indoor unit.This can damage insulation, wirings and cause electrical shock.

Do not expose filter to direct sunlight when drying this may shrink the filter.

***Always call AC technician if you having doubts or service your AC in every six months in a year.

Atlast..

Watch my YouTube channel If you having any doubts.

Always read your AC catalogue before starting any procedures.

Thanks.

Youtube channel click here

How to use the buttons in AC remote?. COOLING/HEATING/ FAN OPERATION

Cooling /Heating /Fan operation

Confirm the unit is plugged in and the power is available.

1. Press the  mode button to select COOL, HEAT (cooling and heating models only) or FAN mode.

2. Press the UP / DOWN buttons to set the desired temperature. The temperature can be set within a range of 15 degree Celsius to 30 degree celsius in one degree increments.

3.Press the FAN button to select the fan speed in 4 steps auto, low , medium or high.

4. Press the ON/OFF button to start the air conditioner.

Special note:

In the fan mode the setting temperature is not displayed in the remote controller and you are not able to control the room temperature.