How to use Buttons in AC remote?. AUTO MODE button.

AUTO OPERATION

ENSURE THE UNIT IS PLUG-IN AND POWER IS AVAILABLE.

THE OPERATION INDICATOR ON THE DISPLAY PANEL OF THE INDOOR UNIT STARTS FLASHING.

1.Press the MODE button to select auto.

2.Press the UP/DOWN button to set the desired temperature. 

The temperature can be set within a range of 16 degree Celsius to 30 degree celsius in one degree increments.

3.Press the ON/OFF of button to start the air conditioner.

PLEASE note these points..

1. In the AUTO mode, the air conditioner can logically choose the mode of cooling, fan and heating sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller.

2. In the AUTO mode, you can not switch the fan speed it can already been automatically controlled

3. If the AUTO  mode is not comfortable for you, the desired mode can be selected manually.

What I mean is, you can change from Auto mode to Cool mode. 

Thank you

AC CLEANING & MAINTENANCE WARNINGS

***You must always read the AC manual before operating any air conditioners very carefully***

Turn off the device and disconnect the power before cleaning. Failure to do so can cause electrical shock.

Do not clean the air conditioner with excessive amounts of water. It may harm you.

Do not clean in the air conditioner with combustible cleaning agents. Combustible cleaning agents can cause fire or deformation.

Caution ⚠️⚠️

1. Disconnect the power if you are not going to use it for a long time. So turn of the power.

2. Turn off and unplug the unit during storms.

3. Make sure that water condensation can drain unhindered from the unit.

4. Do not operate the air conditioner with wet hands because it may cause electric shock.

5. Do not use the device for any other purpose than its intended use.

6. Do not climb onto or place objects on top of the outdoor unit. 

7. Do not allowed the air conditioner to operate for long periods of time with dos or windows open or if the humidity is very high.

... If you want to operate the air conditioner in humidity very high then please use the dry mode for one and half hour then on to cool mode.

Thank you

Why air is not coming from my Indoor AC unit?

One of the most important thing everyone will forget is to clean their air-condition air filters in every 15 days. If you didn't clean your filters inside the indoor unit the air cannot pass through it to blow inside the room and the other side is , it will affect your power consumption to increase.

once your AC is installed go for a maintenance check once in every 6 months. You can get the toll free number in the side of the indoor unit. 

The reason behind that is sometimes rats can enter the ac and cut wires in it. Always call an authorized technicians for service. They may charge little high but you can save your valuable unit.

So I am requesting you to kindly watch my video in YouTube of AC maintenance. Do not perform that with your own. If you watch my video you will get an idea about it.  You can wash filters will tap water or underneath of a shower and kept it inside any room, I mean do not kept the thing beneath sunlight.

If you properly doing thing everyone is healthy in your home breathing hygienic air flow. 

Click here if you want to watch.

Possible Reasons why air is not coming..

1. Air filters are full of dust.

2. Board is damaged.

3.Wires are cut

4. Low voltage

5.Blowers has some problem

**Never ever open your air conditioning self.

Always call in the toll free number or call a authorized technicians from your nearest AC dealer shop.

If you have more doubts please comment here or in my YouTube 

Back to Home

AC remote sleep mode, function & uses

 What is sleep mode?

Sleep mode is commonly used when you are at sleep for more than 7 hours. If you activate sleep mode air-condition will auto adjust its temperature. I am not going to confuse you..

example > If your AC temperature is set 22 in the first hour in auto mode the thing going to  happen is slowly slowly it will come up 23, 24,25... 28 and after some time back to 22. I cannot explain you what is the processing time in between but definitely it will save your  power consumption.

How to activate sleep mode for a good sleep?

1.First you keep your Ac in cool mode in 22 for 1 hour.

2. Activate auto mode 

3. Activate sleep mode

4. Activate timer function for 7 hours.

* remember to activate this mode only after activation of 1 hour cool mode, if you don't activate this I don't think you will not have a good sleep if you activate it directly. 

Best of luck.

My Advise all of the above

If you cut one time outdoor activities like a party , events ,..etc. 

You can definitely add that money to your electric bill.

Thank You